PRE 2017 Aston Hand Pull 1/2 Pint Cabinet Cylinder

PRE 2017 Aston Hand Pull 1/2 Pint Cabinet Cylinder

Item: 1444

  • Smooth Action
  • Easy Maintenance
  • 3 year warranty
  • Easy Change Over

Product Description

Aston Hand Pull 1/2 Pint Cabinet Cylinder


Harry Mason Ltd has been producing high quality Hand Pulls since 1803. In 2016 we created our newest addition The Aston Hand Pull. This combines all of our expert knowledge with the use of modern materials. The Aston Hand Pull 1/2 Pint Cabinet Cylinder has a very appealing price tag and comes with Harry Masons top quality manufacture and reliability hallmarks as standard.

Description


Aston Hand Pull 1/2 Pint Cabinet Cylinder and comes with self-contained water jacket. This eliminates the possibility of cross contamination. The Aston 1/2 Pint Cylinder also comes with an Energised Non Return Valve. This prevents the beer from flowing back down the line.

Installation & Fitting


The Aston Hand Pull and Cylinder is also exceptionally easy to install, change and maintain. To remove the Aston Hand Pull 1/2 Pint Cabinet Cylinder drain both the lines and the cylinder beforehand. This will help eliminate waste and reduce mess. Firstly unscrew the pivot points near the base of the frame. Remove the dispense tap and unclip the spring pin. Once you have the cylinder and dispense tap free from the frame this make it a lot easier to access the jubilee clips. Simply loosen the jubilee clip that holds the connection tube on to the outlet of the top cap and pull the tube off.

To install the new cylinder slide the connection tube over the outlet. Tighten the jubilee clip back up to create an air tight seal. To connect the cylinder to the frame, slide the spring clip through the holes which connect the cylinder clevis and Aston Quadrant together. Screw the dispense tap back to the frame and screw in the pivot point. Tighten the bolts to the frame to avoid them coming loose. Be careful not to screw the pivot points to much but keep them flush with the outside of the frame.

To connect the dispense unit up to the beer line, simply slide a Hose Clip on the end of the beer line. Once in place slide it on the bottom of the Hose Tail. This is then connected to the Aston Cylinder. Make sure to keep all washers and seals in place to keep it air tight.

Testing and Warranty


With the aid of our new test centre the Aston Hand Pull has been put through rigorous testing. This has replicated the equivalent of many years in-trade usage. We have such confidence in the performance and longevity of the Aston Hand Pull that we are able to offer a 3 Year warranty.

Watch the Aston Hand pull in action


Check out our video below showing the Aston Hand Pull reaching 500,000 pulls. If you use 2 Firkins (9 gallons) per week on a single beer pump, we estimate this is the equivalent of 16 years usage! The second video shows you how to change the Aston 1/2 pint cylinder in under 5 minutes.

Delivery & Returns

All orders placed by 13:00 Mon-Fri will be dispatched same day.

We offer a number of delivery options and will always look to introduce additional services as they become available. We offer free standard 2-3 day delivery on all UK Mainland orders but also offer the following additional options:

Timed AM before 12:00 noon the next working day : £10.50

You will always receive a tracking number by text from our courier, typically FedEx but on occasions, we may use Parcelforce. We will notify you which courier we have used.

All orders will also require a signature at the time of delivery. We operate the Challenge 25 scheme with our couriers. If the driver believes you are under 25 you will be asked to provide ID.

If you do not have ID, the driver will not be able to leave your delivery and they will return it to us.

Safety & Hygiene

Instalation

When installing your Pint365 or attaching boxed drinks, please follow our simple instruction guides that are included with your purchase Pint365 does not require any electric to operate but does require beers or ciders to be connected via the pipes we supplied

Cleaning

Please ensure you clean your pipes if you haven't used your Pint365 for a while. We also Suggest you clean the pipes every time you change boxes of beer or cider, we recommend using the Eco Line Cleaner listed in our accessories department.


Children

We love children as much as we love our beer, please remember;

Pint365 is not a toy and is not suitable for operation by anyone under the age of 18

Please keep cleaning products in a safe container on a high shelf out of the reach of children 

Pint365 contains moving parts, please make sure small fingers and toys are kept away from the handle and swan neck at all times

Product Features

  • Weight: 2kg
  • Dimensions: D:30cm W:15cm H:12cm

Write the first review

This product is only available to our trade customers. Please log in or apply for an account.
Call Us